You are here:

Shooshline Alum Doors - 50mm, 75mm & 115mm Hinged, Sliding & Pivot

Sapphire's Shooshline Doors, a cut above the rest with clean flush lines and integrated seals for excellent acousitcs on Slding Doors

INTRODUCTION
Sapphires Shooshline Door Suite provides for aluminium framed glass hinged, sliding or pivot doors for entrys or office fronts. The doors can be single or multiple panel mounted and can be finished to match Sapphire's other Partition Suites.

Doors can be integrated within Sapphire suites so they are captive within the frame.

COMMON USE

Commercial Office Partitions, Meeting Rooms, Entry Doors

FEATURES

  • Rounded Edges for soft touch
  • Electric strike compatible
  • Able to comply with Aust BCA Code for LRV colour difference
  • Combine with Microline/ Frontline for integrated Floortrack or Overhead Sliding options with frame
  • Overhead Pelmet designed for Soft Close/Open tracks.
  • Create French glazed doors easily with Sapphire stick on trims
  • Accept Standard Door Hardware

DISABILITY COMPLIANCE

  • complies with AS1428-2009

FRAME OPTIONS

  • SMALL          - 50mm  x 45mm (Please note not suitable for mortice locks, mortice locks can be fitted to optional 150mm midrail)
  • STANDARD - 75mm  x 45mm
  • LARGE        - 115mm x 45mm

GLAZING OPTIONS
Single glazed 6mm - 14.5mm as per AS1288-2006

DOOR OPTIONS

  • HINGED
  • SLIDING - Overhead Track and Pelmet
  • SLIDING - Floortrack with Overhead Guide Track
  • PIVOT      - When used with industry std Pivot Hinges

PLASTERBOARD OPTIONS
Various as this is a glass framing Door system it can be used in conjunction with standard set plasterboard walls or any of the other available Sapphire Partition Suites.

For more information on this product contact your local Sapphire agent or fill out the email contact form.

back to top >>

Acoustic Performance

Aluminium Door Acoustics

Walls
The Sapphire Aluminium Door Suite may be fixed to walls of any thickness or combined with other Sapphire Partition Suites.

Glass
The Sapphire Aluminium Door suite will accommodate single glazing from 6mm - 14.5mm

 

Please note: The acoustic performance estimate of Sapphire Partition Systems is expressed in terms of Rw and Rw+Ctr. The performance of the as built system may be affected by - soundflaking and or the effectiveness of workmanship and other elements outside of Sapphire's control.

back to top >>

Specification/Care & Maintenance

SPECIFICATION
The Sapphire Shooshline Suite of sections have been developed with over 25 years of experience in supply of suites to the partition industry and is designed to meet the relevant glazing codes and construction codes for internal framing, however fabricators of aluminium frames should seek certification by a consultant  engineer as to the framing being acceptable for the local design impact safety and deflection characteristics required of the site.  Detailed calculations should be provided with final drawings of the aluminium frames.

ALLOY
The Sapphire Shooshline Suite is extruded from primary billet only (No remelt) 6060T5 alloy ensuring that it is of the highest quality suitable for anodising finishes and maintaining colour uniformity from batch to batch.

ALUMINIUM
Doors to be Shooshline Suite by Sapphire Aluminium Pty Ltd(not “equal or equivalent”-see note below*)provided with the specified finish detailed in the finishes schedule and installed in accordance with the project design detail and relevant building codes.”
Sapphire Shooshline Door is available with  50mm, 75mm or 115mm wide stiles and a range of mid-rail options for single glazed doors.

50mm Stile Hinged and Pivot Doors:
Max recomended door panel height shall be 2700mm.
Max recomended door panel width shall be 1000mm.
75mm Frame Hinged and Pivot Doors:
Max recomended door panel height shall be 2700mm.
Max recomended door panel width shall be 1000mm.
115mm Frame Hinged and Pivot Doors:
Max recomended door panel height shall be 3200mm.
Max recomended door panel width shall be 1200mm.

50mm FrameSliding Doors: Floortrack
Max recomended door panel height shall be 2700mm.
Max recomended door panel width shall be 2700mm.
75mm FrameSliding Doors: Floortrack
Max recomended door panel height shall be 2700mm.
Max recomended door panel width shall be 2700mm.
115mm FrameSliding Doors: FloorTrack
Max recomended door panel height shall be 3200mm.
Max recomended door panel width shall be 3500mm.

Note: The above sizes are dependant on the Door Hardware  and tracks specified being able to support the door panel weight. Independant engineering advice should be sort for the suitability of any of the above reccomendations

HARDWARE
- Glazing wedges shall be Sapphire’s wedges for Sapphire’s  Aluminium Partition Door to suit standard glazing options.
- All other hardware as per  SapphireTechnical Manual.

FINISHES
- All anodised material shall be produced by Sapphire to AS1231
- All powder coated material shall be produced by Sapphireto AS3715

CARE & MAINTENENCE

Sapphire Shooshline Suite should only ever need to be washed down with warm water and a mild detergent by rubbing with a soft cloth
Ensure that the cloth is rinsed well with fresh water to remove any detergent residue.
For more information refer to our website www.sapal.com.au

All products are available from Sapphire Aluminium Pty Ltd (A.B.N. 84 123 804 571 ) as detailed in the “SAPPHIRE” Catalogue or on the Internet at www.sapal.com.au .

PLEASE NOTE !
*excluding the words “ equal or equivalent” will avoid substitution of products that in many cases are anything but “equal or equivalent”.  To further ensure you are provided with quality locally produced Sapphire partition systems you may wish to specify a quality Sapphire coloured anodised finish from our extensive range. These finishes can seldom be achieved on inferior imported extrusions thus preventing substitution of inferior products.

* customised profiles are subject to minimum order quantites

Profiles are subject to change or deletion  without notice. Please check on availability  prior to specifiying or ordering.

back to top >>