You are here:

Microline - 40mm Centre & Front Glaze

Sapphire Microline released in 2015 helps you create the industrial Manhattan warehouse feel, combined with whisper quiet sliding doors and the widest range of finishes in Sapphire Anodised or Powdercoated

INTRODUCTION
The Sapphire Microline 40 Suite is primarily used for framing glass. It is a suite that can be adapted to a variety of uses such as double glazing and can be combined with Sapphire’s other suites.

COMMON USE

  • Commercial Office Partitions
  • Residential

FEATURES

  • Rounded Edges for soft touch
  • Snap in Sections all clip inside to maintain original dimensions of sections.
  • Doorframes do not require posts to aid in strength
  • Added Security with Single side Glazing with slide in Wedge to prevent deglazing.
  • Electric strike compatible
  • Able to comply with Aust BCA Code for LRV colour difference
  • Can also be used for a wide variety of Double glaze options
  • Combine with Shooshline Doors for integrated Floortrack or Overhead Sliding options
  • Create French glazed windows easily with Sapphire SAP25T and SAP50T stick on trims

FRAME OPTIONS

  • 40mm x 25mm
  • 40mm x 50mm
  • 40mm x 100mm

GLAZING OPTIONS

  • Single or Double glazed 6mm - 14.5mm as per AS1288-2006

DISABILITY COMPLIANCE

  • Able to comply with 50mm Frame for AS1428-2009

DOOR OPTIONS

  • HINGED - Timber or Glass Doors 32mm - 45mm in thickness
  • SLIDING - Timber or Sapphire Shooshline Doors 45mm in thickness

PLASTERBOARD OPTIONS

Various as this is a glass framing system it can be used in conjunction with standard set plasterboard walls or any of the other available Sapphire Partition Suites.

For more information on this product contact your local Sapphire agent or fill out the contact form.

back to top >>

 

Acoustic Performance

 

 

 

back to top >>

Specification/Care & Maintenance

SPECIFICATION
The Sapphire Microline® Suite of sections have been developed with over 25 years of experience in supply of suites to the partition industry and is designed to meet the relevant glazing codes and construction codes for internal framing, however fabricators of aluminium frames should seek certification by a consultant  engineer as to the framing being acceptable for the local design impact safety and deflection characteristics required of the site.  Detailed calculations should be provided with final drawings of the aluminium frames.

ALLOY
The Sapphire Microline®  Suite is extruded from primary billet only (No remelt) 6060T5 alloy ensuring that it is of the highest quality suitable for anodising finishes and maintaining colour uniformity from batch to batch.

ALUMINIUM
Partition suite to be Microline®  by Sapphire Aluminium Pty Ltd(not “equal or equivalent”-see note below*)provided with the specified finish detailed in the finishes schedule and installed in accordance with the project design detail and relevant building codes.”

Standard Frame     - 25mm
The maximum panel height with out a transom shall be 2700mm.

LARGE FRAME - 50mm
The maximum panel height with a transom positioned between 1000mm - 2800mm in height shall be 3600mm.

HARDWARE
Glazing wedges shall be Sapphire’s colour coded wedges for Microline®  Partition Suite
to suit standard glazing options.
Hinges shall be as per Sapphire Technical Manual.
All other hardware as per Sapphire Technical Manual.

FINISHES
All anodised material shall be produced by Sapphire to AS1231
All powder coated material shall be produced by Sapphire to AS3715

Care And Maintenance
Sapphire Microline® Partition Suite should only ever need to be washed down with warm water and a mild detergent by rubbing with a soft cloth
Ensure that the cloth is rinsed well with fresh water to remove any detergent residue.
For more information refer to our website www.sapal.com.au

WARNING!
Strong detergents and abrasive cleaners should never be used to clean the Sapphire Microline® Partition Suite as it may cause scratching  or damage to the coated surface.

All products are available from Sapphire Aluminium Pty Ltd (A.B.N. 84 123 804 571 ) as detailed in the “SAPPHIRE” Catalogue or on the Internet at www.sapal.com.au .

PLEASE NOTE !
*excluding the words “ equal or equivalent” will avoid substitution of products that in many cases are anything but “equal or equivalent”.  To further ensure you are provided with quality locally produced Sapphire partition systems you may wish to specify a quality Sapphire coloured anodised finish from our extensive range. These finishes can seldom be achieved on inferior imported extrusions thus preventing substitution of inferior products.

* customised profiles are subject to minimum order quantites

Profiles are subject to change or deletion  without notic.e Please check on availability  prior to specifying or ordering.

back to top >>