CLIENT LOGIN
Sapphire Aluminium

25mm Glazing Channel

51 Years of Aluminium Excellence

The Sapphire 25mm Glazing Suite is primarily used for framing glass.

INTRODUCTION
The Sapphire 25mm Glazing Suite is primarily used for framing glass. It is a suite that can be adapted to a variety of uses such as double glazing with larger walls etc.

COMMON USE
Commercial Office Partitions

FRAME OPTIONS
25mm x 25mm

GLAZING OPTIONS
Single glazed 6mm – 12.38mm as per AS1288-2006

DOOR OPTIONS
HINGED – Timber or Glass Doors 32mm – 50mm in thickness
SLIDING – Timber or Sapphire Aluminium Doors 45mm in thickness

COLOURS

  • Available in all Sapphire Anodised Finishes and a wide range of Powdercoat Colours – Dulux or Interpon

PLASTERBOARD OPTIONS
Various as this is a glass framing system it can be used in conjunction with standard set plasterboard walls or any of the other available Sapphire Partition Suites.

For more information on this product contact your local Sapphire agent or fill out the contact form.

 

Available Sections

Additional Information

Acoustic Performance

Walls
The 25mm glazing suite may be fixed to walls of any thickness or combined with other Sapphire Partition Suites.

 

Glass
The 25mm glazing suite will accommodate single glazing from 6mm – 12.38mm

Please note: The acoustic performance estimate of Sapphire Partition Systems is expressed in terms of Rw and Rw+Ctr. The performance of the as built system may be affected by – sound flanking and or the effectiveness of workmanship and other elements outside of Sapphire’s control.

Specification

SPECIFICATION
The Sapphire 25mm Glazing Suite of sections have been developed with over 25 years of experience in supply of suites to the partition industry and is designed and produced by Sapphire to take into account the following Australian Design Standards when used for Internal framing.

AS 1288-2006 – Glass in buildings – Selection and installation

AS 1231-2000 – Aluminium and aluminium alloys – Anodic oxidation coatings

AS 3715-2002 – Metal finishing – Thermoset powder coating for architectural applications of aluminium and aluminium alloys

The Sapphire 25mm Glazing Suite is extruded from primary billet only (No remelt) 6060T5 alloy ensuring that it is of the highest quality suitable for anodising finishes and maintaining colour uniformity from batch to batch.

Care & Maintenance

CARE & MAINTENANCE
Sapphire 25mm Glazing Suite should only ever need to be washed down with warm water and a mild detergent by rubbing with a soft cloth

Ensure that the cloth is rinsed well with fresh water to remove any detergent residue.

For more information refer to our website www.sapal.com.au

WARNING! Strong detergents and abrasive cleaners should never be used to clean the SappGlazing Suite as it may cause scratching or damage to the coated surface.

Easy Product Enquiry

  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
  • This field is for validation purposes and should be left unchanged.

Additional Information

Acoustic Performance

Walls
The 25mm glazing suite may be fixed to walls of any thickness or combined with other Sapphire Partition Suites.

 

Glass
The 25mm glazing suite will accommodate single glazing from 6mm – 12.38mm

Please note: The acoustic performance estimate of Sapphire Partition Systems is expressed in terms of Rw and Rw+Ctr. The performance of the as built system may be affected by – sound flanking and or the effectiveness of workmanship and other elements outside of Sapphire’s control.

Specification

SPECIFICATION
The Sapphire 25mm Glazing Suite of sections have been developed with over 25 years of experience in supply of suites to the partition industry and is designed and produced by Sapphire to take into account the following Australian Design Standards when used for Internal framing.

AS 1288-2006 – Glass in buildings – Selection and installation

AS 1231-2000 – Aluminium and aluminium alloys – Anodic oxidation coatings

AS 3715-2002 – Metal finishing – Thermoset powder coating for architectural applications of aluminium and aluminium alloys

The Sapphire 25mm Glazing Suite is extruded from primary billet only (No remelt) 6060T5 alloy ensuring that it is of the highest quality suitable for anodising finishes and maintaining colour uniformity from batch to batch.

Care & Maintenance

CARE & MAINTENANCE
Sapphire 25mm Glazing Suite should only ever need to be washed down with warm water and a mild detergent by rubbing with a soft cloth

Ensure that the cloth is rinsed well with fresh water to remove any detergent residue.

For more information refer to our website www.sapal.com.au

WARNING! Strong detergents and abrasive cleaners should never be used to clean the SappGlazing Suite as it may cause scratching or damage to the coated surface.