Anodising Now A Standard On New Ipad Mini

 

Anodisation takes a nonferrous metal…

Aluminium won’t rust like iron and steel, but the metal is quite susceptible to corrosion. Its corrosion, or oxidation, produces a layer of aluminium oxide across the surface. Luckily, that aluminium oxide layer is actually quite durable, and it can act as a shell to protect the metal from degrading further.

…and coats it with an oxide layer…

The anodising industrial process starts a controlled oxidation to create an engineered surface layer. It was pioneered in 1923, originally called as the Bengough-Stuart process as a means to seal Duralumin seaplane parts so they could resist corrosion. Today, it’s used on products from roofing to cookware, along with plenty of consumer electronics.

…during an electrolytic process…

The anodising process is simple. An electric current, as high as 300V DC (but normally only about 15-20V), passes through the metal. Then, the aluminium dips into an electrolytic acid bath, often composed of sulphuric acid. On the interior of the acid tank, a plate of lead (or 6063t6 alloy aluminium) acts as the cathode or negative terminal. The charged aluminium acts as the anode, completing the circuit.

In the reaction, oxygen ions migrate from the electrolyte onto the surface of the anodising aluminium. The ions build into a protective layer of oxide that is harder, more durable and roughly 30 per cent thicker than the pure aluminium below it.

…designed to protect the metal inside.

The anodised layer is highly ordered, and it contains nanopores 10-150 nanometres in diameter. These nanopores are essential in the anodizing process, as they allow oxygen to penetrate the aluminium surface and propagate the reaction. However, these pores also let water and air to penetrate the metal, causing corrosion — the exact thing anodisation is meant to avoid.

So the outermost layer of oxide is typically filled in with dyes, or other corrosion inhibitors, before being sealed. The thickness of the oxide layer makes a difference too. Thicker layers can absorb dyes better, while thinner layers create a brilliant sheen.

Along with corrosion resistance, anodising can provide cosmetic benefits, and help aluminium’s ability to take a coat or primer or glue. But anodising isn’t a magic bullet of metal protection. The performance trade-offs include a harder aluminium that’s more brittle. The anodised layer is less likely to crack through physical wear, but it’s more likely to crack through thermal heat stress. [AnodizingWikipediaMilinc]

Sapphire Announces Price Increases

Sapphire Announces Price Increases

GENERAL PRICE ADJUSTMENT EFFECTIVE 1st June 2024 Dear Valued Customer, Sapphire wishes to advise you that due to continuing cost increases associated with the price of...

read more
Christmas Closure 2023

Christmas Closure 2023

Dear Valued Customer, Our Office, Warehouse and Finishing Lines will be closed from 12pm on the 22nd December 2023 for the purpose of annual leave and routine maintenance.To...

read more
Sapphire Announces Price Increases

Sapphire Announces Price Increases

GENERAL PRICE ADJUSTMENT EFFECTIVE 1st July 2023 Dear Valued Customer, Sapphire wishes to advise you that due to continuing cost increases associated with the price of...

read more
Sapphire Announces Price Increases

Sapphire Announces Price Increases

GENERAL PRICE ADJUSTMENT EFFECTIVE 1st June 2024 Dear Valued Customer, Sapphire wishes to advise you that due to continuing cost increases associated with the price of...

read more
Christmas Closure 2023

Christmas Closure 2023

Dear Valued Customer, Our Office, Warehouse and Finishing Lines will be closed from 12pm on the 22nd December 2023 for the purpose of annual leave and routine maintenance.To...

read more
Sapphire Announces Price Increases

Sapphire Announces Price Increases

GENERAL PRICE ADJUSTMENT EFFECTIVE 1st June 2024 Dear Valued Customer, Sapphire wishes to advise you that due to continuing cost increases associated with the price of...

read more
Christmas Closure 2023

Christmas Closure 2023

Dear Valued Customer, Our Office, Warehouse and Finishing Lines will be closed from 12pm on the 22nd December 2023 for the purpose of annual leave and routine maintenance.To...

read more